For Mac/linux/android/windows Ft232 Usb Uart Board Mini

USP view in system Connections FTDI USB-to-TTL 6pins to Arduino Mini Pro:. FTDI USB-to-TTL: TX (yellow) - Arduino Mini Pro RX.

FTDI USB-to-TTL: RX (green) - Arduino Mini Pro TX. FTDI USB-to-TTL: GND (brown) - Arduino Mini Pro GND. FTDI USB-to-TTL: +5Vcc (red) - Arduino Mini Pro VCC. FTDI USB-to-TTL: DTR (orange) - Arduino Mini Pro Reset.

FTDI USB-to-TTL: CTS (non connected) Uploading Sketch with Arduino IDE I'm currently using Arduino 1.5.5. I configured it as below;.

Arduino IDE - Tools - Board - Arduino Pro or Pro Mini. Arduino IDE - Tools - Processor - ATmega328 (5V, 16 MHz). Arduino IDE - Tools - Port - /dev/tty.usbserial-A9ONJH9T. Arduino IDE - Tools - Programmer - AVRISP mkII. /dev/tty.usbserial-A9ONJH9T is the name of serial port shown on Mac OS X.

On windows you should see comX (X is a number). To find serial port name list, write on terminal; username$ ls -l /dev/tty. The FTDI USB-to-TTL have 6 pin with auto reset functionality. So everything function as normal Arduino Uno board.

(No need to reset after upload like version I have). Click on upload sketch (green right arrow). As soon as you see 'Compiling sketch.' On status bar, click on reset button. If your timing is good you'll see 'Done uploading.' Boards that I've used.

Hi Trevor, congratulations for yout clear and very useful work! I followed your tutorial to program my Funduinos( Mini pro clones) but I'm still scratching my head. I checked all connections multiple times, tried two different Funduinos, reloaded the bootloader (just to be sure it was ok), checked all IDE settings but stll can't upload any trivial sketch. I don't know how critical is the timing to let the reset button go: how can I be sure to release it at the right time?

I'm using an FTDI232 USB-to-TTL (jumper set to 5V) on Win 7 Arduino IDE: when upload starts the green LED on it flashes quickly 3 times and nothing more. The IDE tries 10 times (set in verbose mode) and everytime says: 'avrdude: stk500recv: programmer is not responding avrdude: stk500getsync attempt 10 of 10: not in sync: resp=0xa8'. The resp code changes in different upload tries (sometimes it's 0xbd, 0x95 etc) but remains the same in the ten tries.

Please, can you hint me anything to get out of this nightmare? Thanks in advance for your time! Hi, I said HUB because I couldn't get work Digispark/Digistump on my computer's (MacBook) USB then I passed through external USB hub. It's weird isn't it? We used to hear don't use hub, connect directly etc.

This is why I thought might be the same reason you couldn't get upload. I'd love to remember and say you the exact time for reset button but it's more than a year.

I regret that I didn't take a video. It could be clear. I tried capacitor for auto reset when I used Arduino as ISP. It was an essential component. If I reconnect my Arduino mini with this TTL converter I'll shoot a video, sure.

USB TO UART solution with USB micro connector Features. Original FT232RL onboard.

Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10. 3 power mode: 5V output, 3.3V output, or powered by target board (3.3V-5V). 3 LEDs: TXD LED, RXD LED, POWER LED. Functional Pins.

TXD, RXD, RTS#, CTS#: connected to the onboard soldered pinheaders. The other Pins: accessable on the drill holes (separate pinheaders are also provided for easily connecting to user system, the pitch is compatible with bread boards) How to Use In the case of working with a MCU:. VCCIO? 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V).

For Mac/linux/android/windows Ft232 Usb Uart Board Minimum

For Mac/linux/android/windows Ft232 Usb Uart Board Mini S

GND? MCU.RX (signal direction: MCU.RX FT232 PC.RX). RTS? MCU.CTS (signal direction: MCU.CTS FT232 PC.CTS) Dimension Development Resources Wiki:.